High Quality Spring Bar Remover - WatchBandit

Bergeon – 6767-AF – Replacement Fork For Bergeon 6767-F & Bergeon 7767-F

Mick — Mon, 16 Oct 2023 08:25:35 +0000

The Swiss Made Bergeon 6767-AF replacement fine Fork (1 mm) in hardened tempering steel.

Handle: Stainless Steel, Swiss Made
Fork: Hardened Tempering Steel 1 mm
Suitable for: Bergeon 6767-F, Bergeon 7767-F

The post Bergeon – 6767-AF – Replacement Fork For Bergeon 6767-F & Bergeon 7767-F appeared first on WATCHBANDIT.

Bergeon – 6767-BF – Replacement Tip For Bergeon 6767-F & Bergeon 7767-F

Mick — Thu, 05 Oct 2023 08:41:08 +0000

The Swiss Made Bergeon 6767-BF replacement fine tip (ø 0.80mm) in hardened tempering steel.

Handle: Stainless Steel, Swiss Made
Point: Hardened Tempering Steel ø 0.8 mm
Suitable for: Bergeon 6767-F, Bergeon 7767-F

The post Bergeon – 6767-BF – Replacement Tip For Bergeon 6767-F & Bergeon 7767-F appeared first on WATCHBANDIT.

Regine Horlogery – Watch Bracelet Spring Bar Tweezer

Mick — Mon, 25 Oct 2021 11:58:48 +0000

The Swiss Made🇨🇭 Regine Horlogery tweezers are perfect to remove the spring bars on your metal bracelet with its curved arms and forks (1.00 mm), for example for modern Rolex watches, in hardened tempering stainless steel.

Material: Stainless Steel
Size: 120,00 x 32,00 x 8,00 mm (H x W x D)

The post Regine Horlogery – Watch Bracelet Spring Bar Tweezer appeared first on WATCHBANDIT.

3 in 1 Spring Bar & Bracelet Tool – WB Original

Mick — Mon, 07 Jun 2021 10:44:56 +0000

Our spring-bar and bracelet tool for fitting and removing spring bars, so you can attach your favorite WATCHBANDIT watch strap to your watch. You can also use it for removing bracelet links with the screw part. It is made of hardened 316L Stainless Steel and has a fine tip ca. (ø 0.90 mm), a fork ca. (1.00 mm), and a flat screwdriver ca. (1.1 mm). For a tight fit of each tip, they are supported with rubber sealing rings. With a total length of only ca. 9 cm, the tool is extremely handy and easy to travel with, so you can change your straps almost everywhere.

Handle: Hardened 316L Stainless Steel
Fork: Hardened 316L Stainless Steel ca. 1.0 mm
Point: Hardened 316L Stainless Steel ca. ø 0.9 mm
Screw: Hardened 316L Stainless Steel ca. ø 1.1 mm
Length: ca. 9 cm

The post 3 in 1 Spring Bar & Bracelet Tool – WB Original appeared first on WATCHBANDIT.

Bergeon – 6767-F – Professional Spring Bar Tool

Mick — Mon, 05 Aug 2019 09:29:40 +0000

The Swiss Made Bergeon 6767-F tool for fitting and removing spring-bars. It has a fine tip (ø 0.80mm), for example for vintage Rolex or NOMOS Glashütte watch cases with lug holes, and a fork (1.00 mm), for example for modern Rolex watches, in hardened tempering steel.

Handle: Stainless Steel
Fork: Hardened Tempering Steel 1.0 mm
Point: Hardened Tempering Steel ø 0.8 mm
Length: 145 mm

The post Bergeon – 6767-F – Professional Spring Bar Tool appeared first on WATCHBANDIT.